To set up a PassWall router,follow these organized steps:

1. Choose the Correct Version: Select PassWall 4 for older devices (5 series) or PassWall 8 for newer devices (6 series).

2. Download or Install the Software:

   Visit the official PassWall website or use the Windows or Mac PassWall tool to download the appropriate version.

3. Connect Your PC:

   Use the USB cable to connect your PC to the router. Ensure the interface is correctly plugged in.

4. Configure the Router:

   • Open the PassWall installation disk or use the tool to connect your PC's interface to the router.
   • Navigate to the PassWall settings and select the interface you're using.
   • Configure the interface to use the default interface and specify the interface to connect to.

5. Enable Interface Routing:

   • In the router settings, under "Multiple Interfaces," enable interface routing.
   • Connect to one interface and observe if the router automatically routes to the specified interface.

6. Test Configuration:

   • Connect to a different interface to test the routing functionality.
   • Check if all interfaces are properly configured and functioning.

7. Network Configuration:

   • Ensure all interfaces are properly set up, including their IP addresses and ports.
   • Verify that network settings like ports and IP addresses are correct.

8. Test with a Friend:

   If possible, test the device with a friend or family member to identify any issues.

9. Check for Updates:

   Ensure the router is running the latest version of PassWall and that it is fully updated.

10. Security Configuration:

    Consider installing a firewall or security device to restrict access to unauthorized interfaces.

11. Final Configuration:

    • Review the router settings to ensure only authorized interfaces are used.
    • Verify that the router is configured to route to the correct interfaces and that there are no errors.

By following these steps, you should successfully set up a PassWall router for secure network access.